Chapter – 32
CONDUITS AND PIPES

32.1 Scope of Work
The work under this section consists of supplying, installing and commissioning of all material and services of the complete Conduits and Pipes as specified herein and / or shown on Tender Drawings and stated in the Bill of Quantities.

The Contractor shall discuss the electrical layout with the Engineer and coordinate at Site with other services for exact route, location and position of the electrical lines. The conduits and pipes with accessories shall also comply with the General Specifications for Electrical Works, Section-8001 and with other relevant provisions of the Tender Documents.

32.2 General
The extent of works shown on the drawing does not indicate the exact position of conduits and pipes. The Contractor shall ensure exact location and route of conduit and pipes in accordance with other services drawings, as per site requirements and as directed by the Engineer.

The quality and material for the accessories of conduits and pipes such as sockets, elbows, bushing, bends, inspection/pull boxes, round boxes, etc., necessary for the completion shall be similar to that of conduits or pipes. All the accessories shall be supplied by the Contractor without any extra cost and deemed t have been included in the price of conduits/pipes.

32.3 Applicable Standard / Codes
The latest edition of the following standards and codes shall be applicable for the materials specified within the scope of this section:
BS 31 - Steel conduits and accessories
BS 4607 - PVC conduits and accessories
BS 3595 - PVC pipes and accessories
BS 1378 - Galvanized Iron pipes and accessories